BRFGY - PURGEABLE HALOCARBONS KIT 601-S, 48769 (SUP
- MSDS: BRFGY
- Manufacturer: SUPELCO INC
- Product Name: PURGEABLE HALOCARBONS KIT 601-S, 48769 (SUP
- National Stock Number: 6630-00N038707
Product Identification
Product ID:PURGEABLE HALOCARBONS KIT 601-S, 48769 (SUP
MSDS Date:05/27/1992
FSC:6630
NIIN:00N038707
Kit Part:Y
MSDS Number: BRFGY
Responsible Party
BELLEFONTE, PA 16823-0048
US
Emergency Phone: 814-359-3441
Info Phone: 814-359-3441
Cage: 54968
Contractor
Telephone: 314-771-5765/414-273-3850X5996
Cage: 54968
Ingredients
ETHYLENE, 1,1-DICHLORO-; (1,1-DICHLOROETHYLENE) (SARA
CAS: 75-35-4
RTECS: KV9275000
Fraction By Weight: 0.02%
OSHA PEL 1 PPM
ACGIH TLV: 5 PPM;20 PPM STEL
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
(ORAL,RAT) 5628 MG/KG.
CAS: 67-56-1
RTECS: PC1400000
Fraction By Weight: 99.98%
OSHA PEL S,200PPM/250STEL
ACGIH TLV: S,200PPM/250STEL; 93
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HARMFUL IF INHALED. MAY BE FATAL IF
SWALLOWED. HEADACHE, NAUSEA, GASTROINTESTINAL DISTURBANCES,
BLINDNESS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:FLUSH W/WATER FOR AT LST 15 MINS. CONTACT MD. SKIN:FLUSH
W/LG VOLS OF WATER. INHAL:IMMED MOVE TO FRESH AIR. IF BRTHG STOPS,
GIVE ARTF RESP. CONTACT MD. INGEST:NEVER GIVE ANYTHING BY MOUTH TO
UNCO N PERSON. NEVER TRY TO MAKE UNCON PERSON VOMIT. GIVE 2 TBSPS
OF BAKING SODA IN A GLASS OF WATER, PRESS FINGERS TO BACK OF TONGUE
TO INDUCE VOMITING. IMMED CONTACT MD.
Fire Fighting
Flash Point:50.0F,10.0C
Lower Limits:6%
Upper Limits:36.5%
Extinguishing Media:CO*2, DRY CHEMICAL, ALCOHOL FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Accidental Release
Spill Release Procedures:TAKE UP W/ABSORBENT MATERIAL. VENTILATE AREA.
ELIMINATE ALL IGNITION SOURCES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN SEALED CONTAINER IN COOL, DRY
LOCATION. KEEP AWAY FROM OXIDIZERS. KEEP AWAY FROM IGNITION
SOURCES.
Other Precautions:AVOID EYE OR SKIN CONTACT. AVOID BREATHING VAPORS.
Exposure Controls
Respiratory Protection:WEAR NIOSH/MSHA APPROVED FACE MASK W/ORGANIC
VAPOR CANISTER.
Ventilation:USE ONLY IN WELL VENTILATED AREA.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO:1,1-DICHLOROETHYLENE PART B.
Chemical Properties
Boiling Pt:B.P. Text:149F,65C
Melt/Freeze Pt:M.P/F.P Text:-144F,-98C
Vapor Pres:100
Vapor Density:1.1
Spec Gravity:0.79 (H*2O=1)
Evaporation Rate & Reference:>1 (ETHER=1)
Solubility in Water:100%
Appearance and Odor:CLEAR COLORLESS LIQUID.
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS, CHROMIC ANHYDRIDE, LEAD PERCHLORATE, PERCHLORIC
ACIDS.
Disposal
Waste Disposal Methods:COMPLY W/ALL APPLICABLE FEDERAL, STATE OR LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.